20 Biology Essay Topics Hooking Ideas to Discuss in Evolutionary Biology Niche

20 Biology Essay Topics Hooking Ideas to Discuss in Evolutionary Biology Niche Welcome to our second guide where we discuss 20 topics for a cause and effect essay on evolutionary biology. These topics will eventually help you kickstart the writing process without spending too much time or energy on unnecessary research or deciding what to write about. Furthermore, we’ve also included a sample essay hand picked from one of these 20 topics, so you can have a good idea of how a cause and effect essay should be written. You can replicate our essay if you want, but after reading all our guides, we assure you that you would be effortlessly writing a superb essay on your own. If you haven’t already gone through our first guide, 10 facts for a cause and effect essay on evolutionary biology, we urge you to read that before going further, as our first guide helps you build a solid foundation on the subject matter, so you can have a proper context to base your writing on. You also do not want to miss out on our third guide, how to write a cause and effect essay on evolutionary biology, which clearly explains how a cause and effect essay is written, how it’s formatted and what the outlines and methods are, in order to make it stand out in every way. Here are 20 topics on writing an evolutionary biology essay: Stellar Evolution Revealed: The Theory that Tries to Disapprove the Big Bang Theory Life Evolution: The Twin Theories of Spontaneous Generation and Lamarckism The Reasons Why Creationists Believe that Everything is Created by a â€Å"Master Designer† What is â€Å"The Argument by Design† and How Does it Disprove Evolutionary Theory? How Evolutionary Biology has Affected Science, Society and Culture The Revelation of Charles Darwin and His Famous Book â€Å"The Origin of Species† Does â€Å"Evolutionary Biology† Pack Authentic Evidence Which Signifies its Importance as an Applicable Theory? 7 Scientific Theories that Debunk Charles Darwin’s Evolutionary Theories How the First and Second Law of Thermodynamics Contradict Charles Darwin’s Theory What Happened in the French Caribbean Island of Guadeloupe in 1812 that Laid the Evolution Theory to Rest? What are Common Misconceptions about Evolution That Are Still Taught Today? Why Creationism Seems More Scientific than Evolution The Evolution Theory – Did Charles Darwin Made it All Up Based on Assumptions Only? How the Evolution Theory Affects Science and Humans Beings The Theories that Influenced Charles Darwin to Hypothesize the Evolution Theory What was the Main Purpose of Creating the Evolution Theory? Was it Really Based on Scientific Facts and Figures? The Reason Why Almost All Biologists Believed Charles Darwin’s Conclusion that Evolution Had Occurred What Made Charles Darwin Write â€Å"The Origin of Species†. How the Evolution Theory Was Debunked by the Foundations of True Science What was â€Å"The X Club† All About? What Kind of Roles Did it Play in Science? We are certain that you will find these topics relevant to your assignment and you now have something really interesting to write about. One thing’s for sure that you will not get stuck in the initial stages since you have at least 20 topics to choose from. Before we move to our next guide, how to write a cause and effect essay on evolutionary biology, take a look at the sample below, which has been written on one of the topics above: Cause and Effect Sample Essay: 7 Scientific Theories that Debunk Charles Darwin’s Evolutionary Theories Before the 1800s, scientists believed that the world we live in was created by a Master Designer, i.e. God. These scientists were hard workers and dedicated their life to researching and finding scientific facts about the origin of species. However, after the 1900s, philosophers who were rich and powerful, and had influence on society, suppressed those scientific endeavors in order to make their own hypotheses, just to make a name for themselves. William Paley, best known for his Natural Theology, explained that when we see the world, its complexity and how it works, it is clear that there is a Master Designer who has created this masterpiece. In fact, the â€Å"Argument of Design† states that it is unwise, and in some ways, foolish to think that anything at all might come into existence on its own. For example, if we see a watch, we know that it’s been crafted by someone who’s an expert in his/her field. The same goes for the universe; whoever made it must be a master at his craft. It’s a remarkable fact that Charles Darwin’s Evolution Theory was completely debunked even before it was published in his book, â€Å"The Origin of Species†. Carl Linn, one of the earnest creationists at the time, classified numerous species and during his scientific voyage, did not see any proof of ‘halfway species’. This is why he concluded that there were no crossover species, since every form of species are distinct and varied, even though there can be sub-species. However, he still maintained that it was impossible to have halfway species. The First Law of Thermodynamics is one of the most remarkable and highly respected theories today about the origins of the universe. This theory talks about the law of conservation of energy and how, no matter what size or shape, the amount of energy in a particular matter stays the same. This law clearly debunks several evolutionary theories that Charles Darwin had proposed – without scientific facts, it might be noted. The Second Law of Thermodynamics states the same and completely puts the basics of the evolutionary theory to rest, which is: simple evolves into complex. In the law of entropy, in plain words, everything runs down, wears out and is reduced to pieces. One of the most well-authenticated discoveries that also discredit the Evolution Theory is the discovery of a human skeleton in the French Caribbean island of Guadeloupe. This human skeleton dates back to 28 million years – estimated by modern geologists by determining the age of a slab of limestone, in which the skeleton was found. Modern human skeletons have also been found in the depths of the strata. Mendel was a great scientist and a creationist as well. For several years, he bred garden peas and did multiple researches to study the results of crossing various breeds. His work was completed in about eight years and when he revealed his findings, it was distributed among 120 renowned libraries around the world. However, his journal was rejected by the Scientific Society because it, in fact, went against the Evolutionary Theory. In conclusion, his work laid the foundation of modern genetics and revealed that there is a barrier between species that doesn’t allow them to transmute with one another. It was in the 1900s, when his research was discovered again and changed the world of modern genetics. Louis Pasteur was another great scientist who disproved the evolutionary basis: the spontaneous generation theory. This theory states that all living things came into existence from a nonliving material. The evidence behind this was that when a pile of clothes were to remain in a corner for a long time, they would breed mice! However, the reality was that mice would gather around that pile and nest in that place for comfort, warmth and perhaps, to feast on the clothes. Lamarckism, one of the strongest foundations of evolutionary theory, was also disproved by a German scientist, August Friedrich Leopold Weismann. To disprove â€Å"the inheritance of acquired characteristics†, he conducted an experiment on 901 young white mice by cutting off their tails. He did this 19 times (in every successive generation). However, each successive generation was born with a full-length tail. Yet, modern evolutionists still teach Lamarck today, in this modern day and age. Another fact that circumcision of Jewish people doesn’t affect growth on the foreskin put the theory of evolution into question and the legacy of Charles Darwin himself as well. There are a plethora of scientific facts that disprove evolutionary biology and point out that there is a Master Designer who has created this complex world we live in. Despite relying relentlessly on hypothesis with no scientific evidence or proof, our generation still studies evolutionary biology based on the origin of species that we see and perceive. This is utterly wrong and should be done away with completely – so that people can have a broader perspective in general and their researches, along with scientific facts they gather, lead to much more. As promised, you now have a sample essay which will assist you in writing an exceptional cause and effect essay on evolutionary biology. Let’s head on to our third and final guide, how to write a cause and effect essay on evolutionary biology. References: Harvey, P. H., Pagel, M. D. (1991). The comparative method in evolutionary biology (Vol. 239). Oxford: Oxford university press. Huelsenbeck, J. P., Ronquist, F., Nielsen, R., Bollback, J. P. (2001). Bayesian inference of phylogeny and its impact on evolutionary biology. science, 294(5550), 2310-2314. Bookstein, F. L. (1985). Morphometrics in evolutionary biology: the geometry of size and shape change, with examples from fishes. Academy of Natural Sciences. Chagnon, N. A., Irons, W. (1979). Evolutionary biology and human social behavior: An anthropological perspective. J. Edison Adams, (1967) Plants: An Introduction to Modern Biology, p. 585 Chris Colby, (1996) Introduction to Evolutionary Biology talkorigins.org/faqs/faq-intro-to-biology.html Huelsenbeck, J. P., Ronquist, F., Nielsen, R., Bollback, J. P. (2001). Bayesian inference of phylogeny and its impact on evolutionary biology. science, 294(5550), 2310-2314.

Hospitality Careers Research Paper Example | Topics and Well Written Essays - 1250 words

Hospitality Careers - Research Paper Example Subsequently, in the food and beverage industry, positions or rather career options for banquet manager, beverage manager, catering manager, dining room manager, general manager (fullservice), general manager (quick service), human resources manager, kitchen manager and public relations manager among others can be offered, as illustrated in the career website of the National Restaurant Association (National Restaurant Association, 2013). As can be apparently observed from the above list presented for the management careers offered in the lodging and the food and beverage industries are quite vivid in nature. Moreover, both these industries are observed to deliver adequate training assistance to the management professionals as well as fresh graduates that have evidently widened the scope for future development among the employees. Therefore, it can be affirmed that these industries not only reward sufficient scope of career building to the management professionals, but also delivers d ue assistance in personality and professional development of these personnel. 2. Compare and contrast the differences between the General Management (GM) positions within the two (2) industries. Companies in the lodging industry fundamentally need to perform various functions of hospitality services along with providing travel assistance to its customers. Apparently, the role of a General Manager (GM) in lodging industry is quite challenging as the personnel will have to manage the aspects of customer satisfaction, quality of services and regular costs simultaneously with proficient skills and understanding. The GM in lodging industry is also responsible for performing other day to day operations in the business such as accounting for regular transactions, managing the staff and their payroll, handling customer complaints and requests, as well as looking after the efficient use of resources. Being in a role which benefits with the scope of regular interaction with the employees and the customers, the GM is also liable to motivate the employees and make sure that the customers are satisfied with the lodging services delivered by the industry (American Hotel & Lodging Association, 2013). On the other hand, the role of GMs in food and beverage industry may be considered as more complex than that observed in the lodging industry, owing to the additional responsibilities of bakery, food quality regulatory norms adherence and healthcare interventions. Unlike the GMs appointed in the lodging industry, GMs in the food and beverage industry are responsible to prepare reports regarding the food safety measures taken by the staff when cooking and serving the customers accordingly. The GM in food and beverage industry also needs to ensure that at every stage of the operations, laws and regulations concerning health of the customers and the maintenance of quality foods are adhered. Additionally, GMs in the food and beverage industry also share some common responsibilities such as motivating and managing the regular staff members,

Handout Essay Example | Topics and Well Written Essays - 250 words

Handout - Essay Example ssion can also occur from mother to child during â€Å"pregnancy, birth or through breast feeding† and this happens when infected maternal fluids enter a baby’s circulation. Another mode of transmission is through injections in which people share infected needles and syringes, especially those who abuse drugs. The shared materials often contain blood samples of previous users and the blood is injected into another person’s system (Public Health 1). Transfusion of contaminated blood, though this is controlled by screening blood products before use to minimize the risk, is another mode of the infection’s transmission. Other medical processes such as organ transplant may also transmit HIV but prior screening reduces recipients’ vulnerabilities. Previous infections by sexually transmitted infections like gonorrhea and syphilis among other sexually transmitted infections increases a person’s risk of contracting HIV. Lastly, transmission can occur in health care settings when one encounter contaminated fluids or accidental injury by contaminated objects. The virus does not however spread through casual contact like shaking hands, toilet seats, and sharing towels as well as contact with saliva unless it is contaminated with blood (NHS Choices 1; Public Health

Negotiation beforehand Essay Example for Free

Negotiation beforehand Essay You ought to master the art, in a negotiation, of raising the interests of both parties and end up with a lasting common pact. Why selected: Negotiations rooted in self-centered positions often injure the relationship of both parties and are incapable of reaching good agreements. I recall a friend who lost his chance of landing a job because of his tactlessness. Application to a business or personal situation: A couple of weeks ago, a friend had lost a big time prospective employer when he haggled with him over his desired monthly salary, asking a highly competitive one despite being a fresh graduate. What added fuel to the dispute was his provoking voice that possessed an air of domineering insistence. Action steps: The situation above is best addressed by efficiently doing the following: 1. Build a long-lasting relationship with the other party by offering a wise deal. 2. Set aside personal involvement with any issues and try to look over the other side’s viewpoint. 3. Do not counteract emotional outbursts with another raging flow of emotions. 4. Identify the parties’ interests, not their positions as it would undermine the other in the process. 5. Lay down a wide array of alternatives, sit, and pick the best choice to settle issues once and for all. 6. Approach the issue as a common search and decide on the best objective criteria for it. 7. Establish ground rules in negotiation beforehand to have a pre-emptive measure against dirty tricks the other party may later employ (Glaser). Reference: Glaser, Tanya. Conflict Research Consortium Book Summary. http://www. colorado. edu/conflict/peace/example/fish7513. htm. 1998-2005

The Only Fish I Wanted To Catch :: essays research papers

The Only Fish I Wanted To Catch A sensation of astounding warmth enshrouded my mind and body as I blankly stared out on to the choppy lake. I realized that the blinding sun was sure to burn me by the end of the day. I was completely clueless as to where the day would take me. At first I was a little apprehensive about climbing into the small rowboat and heading out there for the entire day. What if I didn’t make it back? I had never been fishing alone. All I craved was to catch the perfect fish. It didn’t have to be big or fat, just perfect for me. So I mustered up the courage and took a chance. The last time I had taken a chance I had paid for it dearly.   Ã‚  Ã‚  Ã‚  Ã‚     Ã‚  Ã‚  Ã‚  Ã‚  Sarina was the perfect girl, and I was determined to let her know how I felt about her. She didn’t make me happy. Happiness was not exactly the emotion she brought out in me. Her presence brought out something within me that was much deeper and more sincere. She was the foundation of my utopia. She had a special quality about her. Most people I know walk around with their souls being held prisoner by their bodies. She was one of those unique people whose body was held captive by her soul. Thirty seconds out of every minute I thought about her. I always made sure she had everything. It took me six months before I could even tell her how I felt. When I finally told her how I felt she took the news really well, but I knew she wasn’t interested. After telling me that our friendship was too close for us to get involved romantically, I swept up the pieces of my shattered heart, put them in my pocket and walked away. I had her snagged on my hook but she thr ew it. I used kindness, and patience, and she used me. I gave her everything she asked of me. She took the bait and ran. She avoided me at all costs for the next two months. Suddenly, I was at the mercy of the wide-open water of my misery, and was fearful of drowning. Had I been coerced into believing we were best friends? We squandered for hours and hours resolving each other’s personal dilemmas. We called each other religiously on the phone when we were apart.

Ece Lab Manual Ece 315

LABORATORY MANUAL ECE 315 MICROPROCESSOR BASED SYSTEM DESIGN LABORATORY 1 TABLE OF CONTENTS S. No. Title of the Experiment Perform the following using 8085 Simulator and 8085 Microprocessor kit in assembly language: (i). Write a program to add two 8-bit numbers. (Or) Write a program to add two 16- bit numbers. (ii) Write a program to subtract two 8-bit numbers. (Or) Write a program to subtract two 16-bit numbers.Perform the following using 8085 Simulator and 8085 Microprocessor kit in assembly language: (i) Write a program to multiply two 8 bit numbers by repetitive addition method (Or) Write a program to multiply two 8 bit numbers by rotation method. (ii)Write a program to divide 16-bit number by 8-bit number. Perform the following using 8085 Simulator and 8085 Microprocessor kit in assembly language: (i) Finding 1’s and 2’s complement of an 8-bit number. (ii) Finding 1’s and 2’s complement of an 16-bit number.Perform the following using 8085 Simulator an d 8085 Microprocessor kit in assembly language: (i) Write a program to count number of 1’s in a program. (ii) Split hex data into two nibbles and swap the higher nibble and lower nibble of that number. Write a program to convert a 2-digit BCD number into its binary equivalent number. Perform the following using 8085 Simulator and 8085 Microprocessor kit in assembly language: (i) Write a program for displaying BCD down counter. Counter should count numbers from 99 to 00 and it should increment after every 1 sec. (ii) Write a program for displaying binary up counter.Counter should count numbers from 00 to FFH and it should increment after every 0. 5 sec. Interfacing of Seven segment display with 8085 microprocessor. Interfacing of D/A converter with 8085 microprocessor to generate RAMP wave. Interfacing and control of stepper motor using 8085 microprocessor. Design 8085 Microprocessor based Traffic light control. Page No. 1 3 2 7 3 11 4 15 5 17 6 19 7 8 9 10 21 23 25 26 2 Exper iment 1 1. Aim: Perform the following using 8085 Simulator and 8085 Microprocessor kit in assembly language: i. Write a program to add two 8-bit numbers. (Or) Write a program to add two 16bit numbers. ii.Write a program to subtract two 8-bit numbers. (Or) Write a program to subtract two 16-bit numbers. Equipment required: 8085 microprocessor kit 2. Learning Objective: a. To acquaint with 8085 microprocessor performance. b. To determine the addition and subtraction of two numbers. 3. Program Program ( i. a ): Program (i. b): 3 Program ( ii. a): 4 Program ( ii. b ): 5 4. Required Results: Input: 1st number: †¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦. 2nd number: †¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦ Output: Addition of two numbers: †¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦. Subtraction of two numbers: †¦Ã¢â‚¬ ¦.. 5. Cautions: a. Before enter the program press RST key on 8085 kit. b. Proper care must be taken while handling the microprocessor kit. . Learning outcomes: Mathematical operations using 8085 kit. 6 Experiment 2 1. Aim: Perform the following using 8085 Simulator and 8085 Microprocessor kit in assembly language: i. Write a program to multiply two 8 bit numbers by repetitive addition method (or) write a program to multiply two 8 bit numbers by rotation method. ii. Write a program to divide 16-bit number by 8-bit number. Equipment required: 8085 Microprocessor kit. 2. Learning Objective: a. To acquaint with 8085 microprocessor performance. b. To determine the division and multiplication of two numbers. 3. Program Program (i. a): 7 Program ( i. b): 8 Program (ii):MVI E, 00 : Quotient = 0 LHLD 2200H : Get dividend LDA 2300 : Get divisor MOV B, A : Store divisor MVI C, 08 : Count = 8 NEXT: DAD H : Dividend = Dividend x 2 MOV A, E RLC MOV E, A : Quotient = Quotient x 2 MOV A, H SUB B : Is most significant byte of Dividend > divisor JC SKIP : No, go to Next step MOV H, A : Yes, subtract divisor INR E : and Quotient = Quotient + 1 SKIP:DCR C : Count = Count – 1 JNZ NEXT : Is count =0 repeat M OV A, E STA 2401H : Store Quotient Mov A, H STA 2410H : Store remainder HLT : End of program. 9 4. Required Results: Input: 1st number: †¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦ 2nd number: †¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦ Output: Multiplication of two numbers: †¦Ã¢â‚¬ ¦.Division of two numbers: †¦Ã¢â‚¬ ¦.. 5. Cautions: a. Before enter the program press RST key on 8085 kit. b. Proper care must be taken while handling the microprocessor kit. 6. Learning outcomes: Mathematical operations using 8085. 10 Experiment 3 1. Aim: Perform the following using 8085 Simulator and 8085 Microprocessor kit in assembly language: i. Finding 1’s and 2’s complement of an 8-bit number. ii. Finding 1’s and 2’s complement of an 16-bit number. Requirements: 8085 Microprocessor kit. 2. Learning Objective: Complement of a number using 8085 kit. 3. Assembly language: Program (i. a): Program (i. b): 11Explanation: This program finds the 2’s complement of an 8-bit number stored in memory location 3000H. Let us assume that the operand stored at memory location 3000H is 85H. The operand is moved to accumulator from memory location 3000H. Then, its complement is found by using CMA instruction. One is added to accumulator by incrementing it to find its 2’s complement. The result is stored at memory location 3001H. Program (ii. a): Explanation: This program finds the 1’s complement of 16-bit number stored in memory 3000H3001H. There is no direct way to find 1’s complement of 16-bit number.Therefore, this can be accomplished by finding the 1’s complement of two 8-bit numbers. Let us assume that the operand stored at memory locations 3000H-3001H is 45H-6AH. The operand is loaded into H-L pair from memory locations 3000H-3001H. The lower-order is moved from register L to accumulator. Its complement is found by using CMA instruction. The result obtained is moved back to register L. Then, the higher-order is moved from register H to accumulato r. Its complement is found by using CMA instruction. The result obtained is moved back to register H. Now, the final result is in H-L pair. 12 The result is stored from H-L pair to memory locations 3002H-3003H. Program (ii. b): Explanation: ? ? ? ? ? ? ? ? ? ? ? ? ? This program finds the 2’s complement of 16-bit number stored in memory locations 3000H- 3001H. There is no direct way to find 2’s complement of 16-bit number. Therefore, this can be accomplished by finding the 1’s complement of two 8-bit numbers and then incrementing it to get 2’s complement. Let us assume that the operand stored at memory locations 3000H-3001H is 12H05H. The operand is loaded into H-L pair from memory locations 3000H-3001H.The lower-order is moved from register L to accumulator. Its complement is found by using CMA instruction. The result obtained is moved back to register L. Then, the higher-order is moved from register H to accumulator. Its complement is found by using CMA instruction. The result obtained is moved back to register H. H-L pair is incremented to get 2’s complement. Now, the final result is in H-L pair. The result is stored from H-L pair to memory locations 3002H-3003H. 4. Required Results: Input: 8-bit number: †¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦ 16-bit number: †¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦ 13 Output: 1’s and 2’s complement of 8-bit number: †¦Ã¢â‚¬ ¦. 1’s and 2’s complement of 16-bit number: †¦Ã¢â‚¬ ¦. . Cautions: a. Before enter the program press RST key on 8085 kit. b. Proper care must be taken while handling the microprocessor kit. 6. Learning outcomes: Student will be able to learn how to use logical instructions. 14 Experiment 4 1. Aim: Perform the following using 8085 Simulator and 8085 Microprocessor kit in assembly language: i. Write a program to count number of 1’s in a program. . ii. Split hex data into two nibbles and swap the higher nibble and lower nibble of that number. Requirements: 8085 M icroprocessor kit. 2. Learning Objective: Swapping of lower and higher nibble of a number. . Assembly language Program ( i ) : MVI B,00H MVI C,08H MOV A,D BACK: RAR JNC SKIP INR B SKIP: DCR C JNZ BACK HLT Program ( ii ) : LDA 2200H ; Get the packed BCD number ANI F0H ; Mask lower nibble RRC RRC RRC RRC ; Adjust higher BCD digit as a lower digit STA 2300H ; Store the partial result LDA 2200H ; Get the original BCD number ANI 0FH ; Mask higher nibble STA 2301H ; Store the result LDA 2300H ; Get the contents of memory location 2300H into accumulator MOV B, A ; save the contents in B register LDA 2301H ; Get the contents of memory location 2301H into accumulator.STA 2300H ; Store the contents of accumulator at address 2000H. MOV A, B ; Get the saved contents back into A register STA 2301H ; Store the contents of accumulator at address 2200H HLT ; Terminate program execution 15 4. Required Results: Input: Enter the number: †¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦ Output: number of one’s in number: à ¢â‚¬ ¦Ã¢â‚¬ ¦. Result after swapping: †¦Ã¢â‚¬ ¦. 5. Cautions: a. Before enter the program press RST key on 8085 kit. b. Proper care must be taken while handling the microprocessor kit. 6. Learning outcomes: Students will be able to learn mathematical operations using 8085 kit. 16 Experiment 5 1.Aim: Write a program to convert a 2-digit BCD number into its binary equivalent number. Requirements: 8085 Microprocessor kit. 2. Learning Objective: BCD to binary conversion of a number. 3. Program: Sample problem: (2200H) = 67H (2300H) = 6 x OAH + 7 = 3CH + 7 = 43H Sample Program: LDA 2200H : Get the BCD number MOV B, A : Save it ANI OFH : Mask most significant four bits MOV C, A : Save unpacked BCDI in C register MOV A, B : Get BCD again ANI FOH : Mask least significant four bits RRC : Convert most significant four bits into unpacked BCD2 RRC RRC RRC MOV B, A : Save unpacked BCD2 in B register XRA A : Clear accumulator (sum = 0) 7 MVI D, 0AH : Set D as a multiplier of 10 Sum: ADD D : Add 10 until (B) = 0 DCR B : Decrement BCD2 by one JNZ SUM : Is multiplication complete? i if not, go back and add again ADD C : Add BCD1 STA 2300H : Store the result HLT : Terminate program execution 4. Required Results: Input: Enter 2 digit BCD number: †¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦ Output: Equivalent binary number: †¦Ã¢â‚¬ ¦. 5. Cautions: a. Before enter the program press RST key on 8085 kit. b. Proper care must be taken while handling the microprocessor kit. . Learning outcomes: Student will be able to learn the use of stack pointer and subroutines. 18 Experiment 6 1. Aim: Perform the following using 8085 Simulator and 8085 Microprocessor kit in assembly language : i. ii. Write a program for displaying BCD down counter. Counter should count numbers from 99 to 00 and it should increment after every 1 sec. Write a program for displaying binary up counter. Counter should count numbers from 00 to FFH and it should increment after every 0. sec. Requirements: 8085 Microprocessor kit. 2. L earning Objective: Implementation of BCD down counter and Binary UP counter. 3. Program ( i ) : LXI SP, 27FFH : Initialize stack pointer MVI C, 99H : Initialize counter = 99 BACK:CALL Display : Call display subroutine CALL Delay : Call delay subroutine ADI 99H : See Addition below DAA : Adjust for decimal CPI 99H : Compare with last count JNZ BACK :If no, repeat HLT 19Program ( ii ) : LXI SP, 27FFH : Initialize stack pointer MVI C, OOH : Initialize counter BACK: CALL Display : Call display subroutine CALL Delay : Call delay subroutine INR C : Increment counter MOV A, C CPI OOH : Check counter is > FFH JNZ BACK : If not, repeat HLT : Stop Delay Routine: Delay: LXI B, count : Initialize count BACK: DCX D : Decrement count MOV A, E ORA D : Logically OR D and E JNZ BACK : If result is not 0 repeat RET : Return to main program 4. Cautions: a. Before enter the program press RST key on 8085 kit. b.Proper care must be taken while handling the microprocessor kit. 5. Learning outcomes: mathem atical operations using 8085. 20 Experiment 7 1. Aim: Interfacing of Seven segment display with 8085 microprocessor. Requirements: 8085 Microprocessor kit, Seven Segment LED & wires. 2. Learning Objective: Seven segment interfacing using 8085 kit. 3. Circuit Diagram: 4. Program: MVI A, 80H OUT CR K: LXI H, 2000H MVI B, 10H KK: MOV A, M OUT PA CALL DELAY INX H JNZ KK 21 JMP K HLT Delay: LXI D, Count Back: DCX D MOV A, D ORA E JNZ Back RET 5.Inputs: 2000: 40H, 79H, 24H, 30H, 19H, 12H, 02H, 78H, 00H, 18H, 08H, 03H, 46H, 21H, 06H, 0EH 6. Result: On the Seven segment LED we can see all the Hexadecimal no’s displayed with some delay as mentioned. 7. Cautions: a. Before enter the program press RST key on 8085 kit. b. Proper care must be taken while handling the microprocessor kit. 8. Learning outcomes: Students will be able to learn how to interface seven segment with 8085. 22 Experiment 8: 1. Aim: Interfacing of D/A converter with 8085 microprocessor to generate RAMP wave.Requireme nts: 8085 Microprocessor Kit, DAC0808, 100nF(2), 1k, Op-Amp 741. 2. Learning Objective: Digital to analog converter interfacing. 3. Circuit Diagram: 4. Program: MOV A, 80H OUT CW MVI A, 00H KK: OUT PA CALL DELAY INC A JMP KK RST 5 Delay: LXI D, Count Back: DCX D MOV A, D ORA E JNZ Back RET 23 5. Result: On the CRO we can see a RAMP wave generated. 6. Cautions: a. Before enter the program press RST key on 8085 kit. b. Proper care must be taken while handling the microprocessor kit. 7. Learning outcomes: Students will be able to learn how to interface digital to analog converter with 8085. 4 Experiment 9 1. Aim: Interfacing and control of stepper motor using 8085 microprocessor. Requirements: 8085 Microprocessor kit, Stepper Motor, Motor driver circuit (ULN2003) & wires. 2. Learning Objective: Stepper motor interfacing with 8085. 3. Program: i) To rotate in Clock Wise direction MVI A, 80H OUT CR MVI A, 44H KK: OUT PA CALL DELAY RRC JMP KK RST 5 ii) To rotate in Anti-Clock Wise directi on MVI A, 80H OUT CR MVI A, 44H KK: OUT PA CALL DELAY RLC JMP KK RST 5 Delay: LXI D, Count Back: DCX D MOV A, D ORA E JNZ Back RET 4.Result: Stepper motor rotates in Clock wise & Anti-clock wise direction. 5. Cautions: a. Before enter the program press RST key on 8085 kit. b. Proper care must be taken while handling the microprocessor kit. 6. Learning outcomes: Students will be able to learn how to interface and control stepper motor with 8085. 25 Experiment 10 1. Aim: Design a 8085 Microprocessor based Traffic light control for figure shown below with the following conditions: Allow traffic to flow from N to S & S to N for 1sec Glow all Yellow lights for 0. sec Allow traffic to flow from W to E & E to W for 1sec Glow all Yellow lights for 0. 2sec Make this process continues. Requirements: 8085 Microprocessor Kit, 9 LED’s, 5K resistors (9) 2. Learning Objective: Traffic light control system using 8085. 3. Circuit Diagram: 4. Program: MVI A, 80H : Initialize 8255, port A and p ort B OUT CR ;(CR) : in output mode START: MVI A, 09H OUT PA; (PA) : Send data on PA to glow R1 and R2 MVI A, 24H OUT PB; (PB) : Send data on PB to glow G3 and G4 MVI C, 28H : Load multiplier count (40 ) for delay 26CALL DELAY : Call delay subroutine MVI A, 12H OUT PA; PA : Send data on Port A to glow Y1 and Y2 OUT 81H ;PB : Send data on port B to glow Y3 and Y4 MVI C, 0AH : Load multiplier count (10 ) for delay CALL: DELAY : Call delay subroutine MVI A, 24H OUT 80H ;PA : Send data on port A to glow G1 and G2 MVI A, 09H OUT 81H; PB : Send data on port B to glow R3 and R4 MVI C, 28H : Load multiplier count (40 ) for delay CALL DELAY : Call delay subroutine MVI A, 12H OUT 80H : Send data on port A to glow Y1 and Y2 OUT 81H : Send data on port B to glow Y3 and Y4 MVI C, 0AH : Load multiplier count (10 for delay CALL DELAY : Call delay subroutine JMP START Delay Subroutine: DELAY: LXI D, Count : Load count to give 0. 5 sec delay BACK: DCX D : Decrement counter MOV A, D ORA E : Check whe ther count is 0 JNZ BACK : If not zero, repeat DCR C : Check if multiplier zero, otherwise repeat JNZ DELAY RET : Return to main program 5. Cautions: a. Before enter the program press RST key on 8085 kit. b. Proper care must be taken while handling the microprocessor kit. 6. Learning outcomes: Students will be able to learn how to design microprocessor based traffic light system using 8085. 27

Leadership And Change Management In The Eastern Bank Limited Business Essay - Free Essay Example

Sample details Pages: 8 Words: 2340 Downloads: 4 Date added: 2017/06/26 Category Management Essay Type Research paper Did you like this example? I would like to thanks all my colleagues for the time and experience they have shared for this unique project that I have undertaken. Our professors guidance is the motivational force to start this project in the direction where we will not only learn about this unit theoretically but also practically. After careful consideration of all the changes happened in the past two decade, i decided to take a financial institution for my project of leadership and change management. Don’t waste time! Our writers will create an original "Leadership And Change Management In The Eastern Bank Limited Business Essay" essay for you Create order I took EBL (Eastern Bank Limited, Bangladesh) as my topic and i carefully studied its last two decades changes and also gone through its future strategy which will shape its business growth. This proposal outlines the framework of my approach addressing each key requirement, ensuring  complete evaluation and recommendations of the issues identified during  the review. This document will provide the following: Why and how these changes have occurred and how this organization took the opportunity for its own goals to get fulfilled keeping in mind the global competition and also its culture. In my project, i will bring you the highlight how private bank change itself from its traditional system and method to modernization. What is the driving force behind this changes? To build my solid base, i have gone through every possible research and beyond that. For any further assistant for this proposal, please feel comfortable to browse the website www.ebl-bd.com 2.INTRODUCTION The incremental change which they started slowly but forcibly put a lot of pressure on the traditional way of their banking system. Traditionally, the bank functional relationship was strong and was fully based on mutual understanding and trust amongst their employees regardless of the hierarchical structure. The hierarchical structure was rigid but very efficient where morale of the employee was very high and employee turnover was very low. These were the basic hurdle which made it difficult for the organization to bring the changes. Survival is always of the fittest and who survive the change, Rules. The driving factors of the changes were very strong as compare to its stability like the rapid changes in the business environment, globalization era and the evolving latest technology. EBL analyzed carefully its strength and its weaknesses inside its organization and studied/ evaluated the macro environmental elements for its threats and opportunities. The new structu re which was the outcome of change was more effective and efficient. The change was not that easy and got a lot of resistance from employees whom they overcome by having regular meetings and training and development. 3.PROJECT SYNOPSIS 3.1 Purpose The purpose of this review is to analyze the changes which EBL Private Bank gone through within the last two decades. The catalyst of this change is believed to be globalization, technological advancement innovation, competition and other macro environmental factors which stirred this organization. This organization not only survived but also expanded its operation nationally and internationally on a large scale. From study and survey we found out that its hard for the competitors to imitate its services and embedded culture which makes this organization strong in its core capabilities.  I try to analyze the forces which provide me view of change problems that need to be rectified and also by identifying forces for and against the change. The forces which pushed Against Force / Resisting Organization working hard ethically to deliver perfect result Loyalty and commitment of employees Choosing alternate requirements and potential flexibilities Motivatio n and encouragement Working on the feedback from staff survey staff want changes in how they are treated Pushing staff to work in a new ways Participation in a change process Traditional structure Bureaucracy Pressure of work during phase of changes Culture blame Communication problem inside the organization 3.2 Scope   Ãƒâ€šÃ‚  Ãƒâ€šÃ‚  Ãƒâ€šÃ‚  Ãƒâ€šÃ‚  Ãƒâ€šÃ‚  Ãƒâ€š The scope of the review will be from the point of decision to make its stand against its rival private competitors which were not only fully equipped with modern technology but also with full monitory funds. Due to strong unfavorable circumstances this EBL not only worked on its core values but also build its long term strategy in which they fully succeeded. They changed their view of seeing the business from profit oriented (i.e. by not caring for the customer but the money) to customer oriented which the private banks were doing. Not only they changed this culture but also introduced the latest innovative technology.  3.3 Objective The objective of this review will be to: 1.  Ãƒâ€šÃ‚  Ãƒâ€šÃ‚   Investigate and explore the flow of this organizations survival and expansion keeping in mind the globalization period. 2.  Ãƒâ€šÃ‚  Ãƒâ€šÃ‚   Research and detail the positive and negative effect and changes in its culture and organizational structure. 3.  Ãƒâ€šÃ‚  Ãƒâ€šÃ‚   Finding the advantages and disadvantages of this change process. 4. What were the outcome of these changes and how small changes led to the big changes? 5. The method and strategy decision they have opted to bring these changes? 6. What were the barriers to changes, was that the hierarchical management structure of the bank? 4. ORGANIZATIONAL OVERVIEW During the process of liberalization in 1991, banking has gone tremendous amount of changes. The main motive of these changes was to take the organization into profitable efficient and competitive side. These reforms become the fundamentals of the bangladesh economy and transferred the operating environment of the banks and financial institution in the country. During the tenure of pre-liberalization banking system were majorly handled by government fiscal and development polices. It open the opportunities for the bank to diversify into credits cards, insurance, investment banking, mortgage financing and depository services etc. 4.1 Companys Background. Eastern Bank Limited was founded in 1992 and is headquartered in Dhaka, Bangladesh. the company makes investments, placements, and borrowing in money and capital markets; and deals with foreign exchange business, as well as provides Internet banking, corporate banking, and Hajj remittance services, such as handling foreign demand drafts and foreign telegraphic transfers in Saudi Arabian and local currency. As of December 31, 2008, it had 34 branches, 36 owned automated teller machines (ATMs), and 118 shared Q-cash ATMs. Today, Eastern Bank of Bangladesh has spreads its arms around the world and has became the second largest bank in the world. EBLs international banking group delivers the full range of cross-border finance solutions. They have not stopped yet but have got further strategy to become the worlds no. 1 bank. These competitions open the door for the customers to their great satisfaction and also technology path in Indian banks. Banks started themselves to look into th e mirror of global competition which increased their efficiency growth. 4.2 ORGANIZATIONAL STRUCTURE (BUREAUCRATIC) Present profile of this organization A)  Ãƒâ€šÃ‚   Organizational structure B) It has spread its branches all over nationally and internationally collaborating with subsidiaries and non-subsidiaries. Eastern Bank of Bangladesh credit card Eastern Bank Of Bangladesh Online Eastern Bank Of Bangladesh USA Eastern Bank Of Bangladesh Services Eastern Bank Of Bangladesh Mutual Funds Eastern Bank Of Bangladesh Branch Eastern Bank Of Bangladesh NRI Account Banking subsidiaries: Eastern Bank of Narayanganj (EBN) Eastern Bank of Sylhet (EBS) Eastern Bank of Chittagong (EBC) Eastern Bank of Barisal (EBB) Eastern Bank of Rajshahi (EBR) Eastern Bank of Khulna (EBK) Eastern Bank of Ishwardi (EBI) Foreign subsidiaries: Eastern Bank of Bangladesh International (Mauritius) Ltd. Eastern Bank of Bangladesh (California). Eastern Bank of Bangladesh (Canada). INMB Bank Ltd, Lagos. Non- banking subsidiaries: EBL Capital Market s Ltd (EBLCAP) EBL Funds Management Pvt. Ltd (EBL Funds) EBL DFHI Ltd (EBL DFHI) EBL Factors and Commercial Services Pvt. Ltd (EBL Factors) EBL Cards Payments Services Pvt. Ltd. (EBLCPSL) Joint ventures: EBL Life Insurance Company Ltd (EBL Life). Activities: Eastern Bank of Bangladesh administrative structure is well equipped to oversee the large network of branches in Bangladesh and abroad. The State Bank of India has 14 local head offices and 34 zonal offices which are located at important cities spread throughout the country. Eastern Bank Of Bangladesh has 52 foreign offices in 34 countries across the globe. The corporate accounts group is a strategic business unit of the bank set up exclusively to fulfill the specialized banking needs of top corporate in the country. The main activities of are into- Personal banking. NRI services. Agriculture. International. Corporate. Domestic treasury. Eastern Bank Of Bangladesh offers the follo wing services to its customers Domestic Treasury. SBI Vishwa Yatra Foreign Travel Card. Broking services. Revised service charge. ATM services. Internet Banking. E-Pay. E-Rail. RBIEFT. Safe Deposit Lockers. Gift Cheques. MICR Codes. Foreign Inward Remittances. 5. METHODOLOGY My research is an academic activity which deals with the long term changes happened in the Eastern Bank of Bangladesh which is the largest public financial institution in Bangladesh. My research comprise of studying the companys history and analyze its banking system which reveals many driving force and hindering force for its transitional change on large scale. My analysis is further backed by quantitative analysis using the latest PESTAL and other relevant models which we are going to reveal further in our project as I proceed. To make sure what I am presenting, the case of change is viewed from outside the organization and also from its outside macro environment. I am not actively involved in this change but are observing and gathering all the information and data from very significant resources and also from the people who were/ are employee or other words anyhow directly or indirectly involved in this organization during the whole tenure of happening of these changes. 5.1 Approach I understand the concept of this topic and going to take all major approaches to make my project successful and knowledge worthy. The question and the guidelines are carefully chosen and sentenced so that we can get accurate information required for our project. The following methods are chosen for gathering information:- Personal interviews Telephonic interviews Electronic media( TV, radio, internet, online journal articles) Mail and e-mail Newspaper, articles, business magazines Group discussion. Observation and experience Unit lecturer MR. LLANDIS BARRAT-PUGH We are generating a debate in a class to find out more on this subject of change in SBI. Argumentative discussion is most welcome. We want our proposal to be challenged.    5.2 Limitations of this Proposal My research is basically concentrated on the EBL banks and its alliances which is the largest private sector bank of Bangladesh. So we cannot analyze all about the other banking system on the basis this research. Being such a great organization which has spread its arms nationally and internationally, its hard for the research to take into account all the variables of its different branches at different locations. 6. SELF SYNOPSIS Being a passive leader, i understand the drawback of not involving actively in the organization. But as a customer, i observed the trends and culture from its prevailing environment. We put lot of effort to find out, why and how they brought the changes in the system and what are the impacts of the changes on society and on the organization. Being a leader, we evaluated these changes and drawn a conclusion of its advantages and disadvantages. Leader always back up the changes for its positive effect and keep him focused and involved in the core values of the changes. He is solely responsible for his own behavior and actions. Detailed approach has been taken to each and every point of this proposal and studied the concept in depth. 7. SUGGESTIONS Based on our personnel research and observation we found that private sectors are not that much efficient in comparison with the public sector. Still they have to go a long way to improve their capabilities. They also need to put into practice the training requirements for the existing and new employees to make the system more efficient and increase the knowledge to use the new technology changing with time. They should also need to create a culture of sharing knowledge among the other colleagues so that they would be able to build trustworthy and strong team. Therefore, the private sector banks must emphasize on change management. This whole proposal state that EBL has emerged as a bright leader who has rectified its weakness and worked on its strength and reduced its threat  and grab the opportunities. Focus on key issues What are the driving forces behind these changes? How EBL gone has undergone the transformational change or otherwise would have gone out of business/ dead? What is the reason of these driving forces which made EBL to take big step (is it because of globalization, technology, political, economical or the social)?   8.CONCLUSION After carefully considering the diagnosis of the organization which has gone through the tremendous change, we concluded that it was necessary to do so and they have done it very carefully after analyzing the whole situation which involved its major competitors, political, economical, legal, environmental, social and technological and its own structure and culture. We also felt proud to do this proposal of this great organization because it not only survived during the critical transformational change as we know where most of the organization at that point went out of business/site but his organization was lucky and well kept on its strategic change decision by which not only survived but also came out with flying colors. It is one of the largest network organizations in the present time giving edge of competition to its competitor and new entrants. Its capabilities, capacity and diversity are the focus of this whole change which was not only about the top man agers but also about the junior employees who showed the enthusiasm towards this structural and cultural change. The company, not only, empowered the top level but also the lower level employees to bring this effective change. The size and complexity was a major concerned of this change in which the organization didnt show any sign of reluctance to invest and understand the lack of urgency. We also put our efforts to see its culture web which include stories like celebrating its success, spreading the good news about people and what they are doing, thanking and rewarding people and the mistakes they have made and learn from them. The paradigm of this organization show us valuing diversity, learning culture, strong work ethics, loyalty commitment and outward looking / forward thinking/ innovative.